Welcome to the LCL website!

Complete Assembly

    • The product BRAKE LEVER FOR 11VT M/C has been added to comparison list.
    • The product BRAKE LININGS - FOR 11VT M/C, 328MM DIA BRAKE, 93MM LONG X 50MM WIDE X 6MM THICK has been added to comparison list.
    • The product BRAKE LEVER FOR 11VT M/C has been added to comparison list.
    • The product SCREW FOR BRAKE ARM ON 160VAT M/C has been added to comparison list.
    • The product SWITCH - TRIPPING, FOR GOVERNOR / TENSION WEIGHT has been added to comparison list.
    • The product SWITCH - TRIPPING, FOR GOVERNOR / TENSION WEIGHT has been added to comparison list.
    • The product SWITCH - TRIPPING, FOR GOVERNOR / TENSION WEIGHT has been added to comparison list.
    • The product SWITCH - REMOTE RESETING, FOR T..20602A GOVERNOR has been added to comparison list.
    • The product DOOR ARM FOR 9550 OPERATORS L/H (800-900mm OPENING) has been added to comparison list.
    • The product TRIPPING DEVICE - REMOTE, R/H, 24V, FOR GOVERNOR TYPE TAA20602A.. has been added to comparison list.
    • The product TENSION WEIGHT - FOR APOLLO GOVERNOR, 224MM DIA PULLEY X 6-6.5MM DIA ROPE has been added to comparison list.

8 Item(s)

per page

List  Grid 

Set Descending Direction
  1. TENSION WEIGHT - FOR APOLLO GOVERNOR, 224MM DIA PULLEY X 6-6.5MM DIA ROPE
    Part No.: TAA22700F10

    TENSION WEIGHT - FOR APOLLO GOVERNOR, 224MM DIA PULLEY X 6-6.5MM DIA ROPE

    TENSION WEIGHT - FOR APOLLO GOVERNOR, 224MM DIA PULLEY X 6-6.5MM DIA ROPE Learn More

  2. TENSION WEIGHT - TYPE APOLLO, 224MM DIA PULLEY, FIXINGS FOR T1-T90/T16-T2 GUIDES, WITH SUPPORT
    Part No.: TBA22700D12

    TENSION WEIGHT - TYPE APOLLO, 224MM DIA PULLEY, FIXINGS FOR T1-T90/T16-T2 GUIDES, WITH SUPPORT

    TENSION WEIGHT - TYPE APOLLO, 224MM DIA PULLEY, FIXINGS FOR T1-T90/T16-T2 GUIDES, WITH SUPPORT Learn More

  3. TENSION WEIGHT - TYPE APOLLO, 224MM DIA PULLEY, W/O SUPPORT & FIXINGS
    Part No.: TBA22700D14

    TENSION WEIGHT - TYPE APOLLO, 224MM DIA PULLEY, W/O SUPPORT & FIXINGS

    TENSION WEIGHT - TYPE APOLLO, 224MM DIA PULLEY, W/O SUPPORT & FIXINGS Learn More

  4. TENSION WEIGHT - TYPE APOLLO, 305MM DIA PULLEY, MAXIMUM RISE 90M, 34.8KG WEIGHT, HAND A
    Part No.: TBA22700E15

    TENSION WEIGHT - TYPE APOLLO, 305MM DIA PULLEY, MAXIMUM RISE 90M, 34.8KG WEIGHT, HAND A

    TENSION WEIGHT - TYPE APOLLO, 305MM DIA PULLEY, MAXIMUM RISE 90M, 34.8KG WEIGHT, HAND A Learn More

  5. TENSION WEIGHT - TYPE APOLLO, 305MM DIA PULLEY, MAXIMUM RISE 90M, 34.8KG WEIGHT, HAND B (OBSOLETE)
    Part No.: TBA22700E16

    TENSION WEIGHT - TYPE APOLLO, 305MM DIA PULLEY, MAXIMUM RISE 90M, 34.8KG WEIGHT, HAND B (OBSOLETE)

    TENSION WEIGHT - TYPE APOLLO, 305MM DIA PULLEY, MAXIMUM RISE 90M, 34.8KG WEIGHT, HAND B Learn More

  6. TENSION WEIGHT - TYPE APOLLO, 224MM DIA PULLEY, FIXINGS FOR T3-T70/T9-T4 GUIDES, WITH SUPPORT
    Part No.: TBA22700D11

    TENSION WEIGHT - TYPE APOLLO, 224MM DIA PULLEY, FIXINGS FOR T3-T70/T9-T4 GUIDES, WITH SUPPORT

    TENSION WEIGHT - TYPE APOLLO, 224MM DIA PULLEY, FIXINGS FOR T3-T70/T9-T4 GUIDES, WITH SUPPORT Learn More

  7. TENSION WEIGHT - 224MM PULLEY, USED WITH TBA20602C TYPE GOVERNORS, 224 & 305MM
    Part No.: TAA22700F7

    TENSION WEIGHT - 224MM PULLEY, USED WITH TBA20602C TYPE GOVERNORS, 224 & 305MM

    TENSION WEIGHT - 224MM PULLEY, USED WITH TBA20602C TYPE GOVERNORS, 224 & 305MM Learn More

  8. TENSION WEIGHT - 305MM PULLEY, USED WITH TBA20602C TYPE GOVERNORS, 224 & 305MM
    Part No.: TAA22700F20

    TENSION WEIGHT - 305MM PULLEY, USED WITH TBA20602C TYPE GOVERNORS, 224 & 305MM

    TENSION WEIGHT - 305MM PULLEY, USED WITH TBA20602C TYPE GOVERNORS, 224 & 305MM Learn More

8 Item(s)

per page

List  Grid 

Set Descending Direction
Shop by

Shopping Options

Manufacturer
  1. Otis (8)
Governor Type
  1. APOLLO (6)
  2. APOLLO (6)
Need Help? Call us on 0844 7782348
Newsletter
My Basket

You have no items in your shopping basket.

Compare Products (75)
  1. Remove This Item

    SHOE - DOOR GUIDE, NYLUBE, BLUE, DL-4 (17/32 INCH W)

  2. Remove This Item

    SHOE - DOOR GUIDE, NYLUBE, BLUE, DW-4 (17/32 INCH W)

  3. Remove This Item

    SHOE - DOOR GUIDE, NYLUBE, GREEN, DL-2 (15/32 INCH W)

  4. Remove This Item

    SHOE - DOOR GUIDE, NYLUBE, WHITE, DW-3 (1/2 INCH W)

  5. Remove This Item

    SHOE - DOOR GUIDE, NYLUBE, GREEN, DW-2 (15/32 INCH W)

  6. Remove This Item

    SHEAVE - 7X16MM ROPES, 890MM MAIN DIA

  7. Remove This Item

    SWITCH FOR GOVERNOR - TRIPPING SWITCH >1MPS

  8. Remove This Item

    SHOE - DOOR GUIDE (90 X 32 X 10MM)

  9. Remove This Item

    PACKING - FOR WORM SHAFT ON 19BT & 19BEC MACHINES GEARED TRACTION

  10. Remove This Item

    ENCODER COUPLING KIT - REDUCING & FLEXIBLE

  11. Remove This Item

    CIRCLIP FOR GEARS ON FC09950T OPERATOR

  12. Remove This Item

    VANE - MOVABLE, FOR TECHNA/DO2000 R/H (510MM LONG)

  13. Remove This Item

    DETERRENT DEVICE (MECHANICAL LOCK) - R/H, FOR HPCD/D2200 DOOR MOVABLE VANE

  14. Remove This Item

    AIRCORD - PRIMA CAR 2PCO - 800mm

  15. Remove This Item

    ACTUATING PAWL ARM/WITH PIN (FCO9550T)*

  16. Remove This Item

    PAWL - PLASTIC, REPLACEMENT KIT FOR TECHNA / DO2000 MOVABLE VANE

  17. Remove This Item

    DOOR ARM FOR 9550 OPERATORS L/H (800-900mm OPENING)

  18. Remove This Item

    HANDRAIL - CHROME, ROUND, 900MM, 2 FIXINGS, FOR OTIS2000 & GEN2

  19. Remove This Item

    CABLE - ELECTRICAL, FOR DETECTOR TYPE PANDOORA

  20. Remove This Item

    LIMIT SWITCH - R/H, FOR POSITION REFERENCE SYSTEM GEN2

  21. Remove This Item

    SWITCH - FOR BUFFER TYPE B9573T

  22. Remove This Item

    ROPE CLIP - FOR SUSPENSION ROPES 14-16MM

  23. Remove This Item

    BRUSH - (12.5MM L X 4MM W X 3MM T) FOR ENCODER ON GAMMA S M/C

  24. Remove This Item

    LAMBDA RX RECEIVER - WITH 7M LONG CABLE

  25. Remove This Item

    SIGNAL BOX FOR 1100GMP DOOR OPERATOR

  26. Remove This Item

    BRACKET - FOR HANDRAIL FOR BEDLIFT

  27. Remove This Item

    BRACKET / HOLDER - FOR RBI, 64Kn

  28. Remove This Item

    BUFFER - FOR 2PCO PAX CAR DOORS

  29. Remove This Item

    BUFFER - POLYURETHANE, 220MM DIA, 80MM HIGH, YELLOW SPOT

  30. Remove This Item

    BUFFER - FOR DOOR ARM ON 2PSO PRIMA CAR DOORS

  31. Remove This Item

    BUSHING FOR COUNTERWEIGHT SIDE TERMINATION CLAMP FOR SUSPENSION BELTS 32KM ON GEN2

  32. Remove This Item

    CLIP - SPRING TYPE, FOR SECURING CAR PANELS OTIS2000

  33. Remove This Item

    ANGLE - FOR LEFT SIDE OF DOOR HANGER ON 2PSO TECHNA R/H CAR DOORS

  34. Remove This Item

    RAMP (FUNNEL) L/H FOR PRIMA CAR DOORS 2PSO&2PCO

  35. Remove This Item

    MOULDING COVER - SILVER SATIN, 1340MM LONG, FOR OTIS2000&GEN2 MIRRORS

  36. Remove This Item

    MOULDING CORNER - CHROME, 2294MM LONG, FOR OTIS2000&GEN2 MIRRORS/ BETWEEN DÉCOR PANELS

  37. Remove This Item

    PLUG - CHROME, FOR HANDRAIL OTIS 2000

  38. Remove This Item

    CLAMP FOR TOOTHED DRIVE BELT FOR OPEN2001

  39. Remove This Item

    RELAY FOR HPDO DOOR OPERATOR & EMERG.ISPECT.PANEL GEN2

  40. Remove This Item

    COMPLETE DETECTOR KIT INCLUDING FIXINGS - ELECTRONIC 2D, AIRDRI TYPE, WITH 2.3M CABLE

  41. Remove This Item

    STRAP - FLEXIBLE, WITH CLAMP FOR STRAPPING WEIGHTS INTO FRAME

  42. Remove This Item

    BELT REDUCTION - FOR D2200 2PSO & 2PCO - 716mm LONG

  43. Remove This Item

    PULLEY + ENCODER FOR 2PSO CAR DOORS ON D2200 OPERATOR

  44. Remove This Item

    MOTOR - DOOR GEAR FOR HSDS D2200 & OPEN 2002 (HSDS), 2PSO & 2PCO (220V, 200W, 1000RPM)

  45. Remove This Item

    ADAPTER KIT FOR DCSS4/ DO2000/ HSES DOOR OPERATORS

  46. Remove This Item

    DRIVE BELT - 930MM LONG X 8MM WIDE

  47. Remove This Item

    ENCODER COUPLING & REDUCER FOR MOTOR END ON GAMMA D

  48. Remove This Item

    DETECTOR - PASSIVE, INFRARED MOVEMENT

  49. Remove This Item

    COUNTERWEIGHT - FOR GOVERNOR SWITCH TYPE 6098

  50. Remove This Item

    SHEAVE - 260MM DIA, 3 X 6.5MM ROPES, 35 D U/C, FOR 6BT M/C

  51. Remove This Item

    STOP - DOOR, FOR OVL OPERATOR

  52. Remove This Item

    RIVET - FOR BRAKE LININGS ON LEO 9/14/22

  53. Remove This Item

    SHEAVE / PULLEY - VEE, WITH RIM, 105DEG U/C, 5 X 13MM ROPES, FOR 131HT GEARLESS M/C

  54. Remove This Item

    BUMPER FOR CAR ASSEMBLY, MRK TO VR UK MODELS

  55. Remove This Item

    FAN - R/H, FOR GEARLESS M/C TYPE DC131HT

  56. Remove This Item

    SWITCH FOR OLEO TYPE BUFFER

  57. Remove This Item

    SHIM - INSULATING, FOR SWITCH ON 9750 TYPE GOVERNOR

  58. Remove This Item

    LEVER - SWITCH TRIPPING, FOR 9750 TYPE GOVERNOR

  59. Remove This Item

    SHEAVE / PULLEY - WITH BEARING, FOR 9705 TYPE GOVERNOR

  60. Remove This Item

    MOTOR FOR FAN ON GAMMA 160 M/C, 50Hz

  61. Remove This Item

    BUSH - FOR TENSION WEIGHT PULLEY, FOR 9705 TYPE GOVERNOR

  62. Remove This Item

    LEVER / BRACKET - FOR TENSION WEIGHT ON 9705 TYPE GOVERNOR

  63. Remove This Item

    KIT PLATE - FOR CAR ASSEMBLY CZ-CW & CS-CL MRL, CHROME FINISH, 450MM LONG

  64. Remove This Item

    BRAKE ACTIVATING LEVER ARM FOR 15AT/15ATL M/C

  65. Remove This Item

    TRIPPING SWITCH - L/H, FOR SAFETY GEAR & SELECTOR TAPE

  66. Remove This Item

    PULLEY - FOR GOVERNOR TENSION WEIGHT A9569T

  67. Remove This Item

    BRAKE LEVER FOR 11VT M/C

  68. Remove This Item

    BRAKE LININGS - FOR 11VT M/C, 328MM DIA BRAKE, 93MM LONG X 50MM WIDE X 6MM THICK

  69. Remove This Item

    BRAKE LEVER FOR 11VT M/C

  70. Remove This Item

    SCREW FOR BRAKE ARM ON 160VAT M/C

  71. Remove This Item

    SWITCH - TRIPPING, FOR GOVERNOR / TENSION WEIGHT

  72. Remove This Item

    SWITCH - TRIPPING, FOR GOVERNOR / TENSION WEIGHT

  73. Remove This Item

    SWITCH - REMOTE RESETING, FOR T..20602A GOVERNOR

  74. Remove This Item

    TRIPPING DEVICE - REMOTE, R/H, 24V, FOR GOVERNOR TYPE TAA20602A..

  75. Remove This Item

    TENSION WEIGHT - FOR APOLLO GOVERNOR, 224MM DIA PULLEY X 6-6.5MM DIA ROPE

Clear All
Brands

  1. Adams

  2. Any

  3. any

  4. Bennie

  5. consumable

  6. Dewhurst/Dupar

  7. Evans

  8. Express

  9. Fermator

  10. Gal

  11. IGV

  12. movemanSKG

  13. Otis

  14. Selcom

  15. Select

  16. Select

Lift Components Limited, 123 Abbey Lane, Leicester. LE4 5QX. Tel: 0844 7782348, Fax: 0844 7782349, Email: sales@liftcomponents.co.uk
Registered Office: Chiswick Park, Building 5, Ground Floor, 566 Chiswick High Road, London, W4 5YF - Registered No: 147366
The content of this site is copyright © Lift Components Limited