My Cart 0
£0.00

E OPERATOR SOFTWARE

Part No.
PDECA205
Views: 20
£60.00 £50.00
E OPERATOR SOFTWARE for PCB 83643 issue 4
Next day delivery is for stock items only. To get stock availability please contact LCL.

E OPERATOR SOFTWARE for PCB 83643 issue 4

this is an upgrade from previous versions PDECA202, PDECA203, PDECA204

this software version has two main enhancements over previous versions. These are:

• To apply a holding torque to the door motor at the end of the opening cycle. • To select the behaviour of the vane motor at power up.

With previous versions of E operator software, once the doors reached the fully open position, power was removed from the motor totally, and this could lead to the doors coasting in the closing direction slightly under the influence of the landing door closer.

Version 205 allows an adjustable amount of torque to be applied to the motor at the end of opening to keep the doors open.

On door operators fitted with a vane motor for landing door pickup, previous versions of E operator software would cycle the vane motor when power was first applied in order to establish a know position of the pickup vane. On some applications, this initial cycling of the vane motor was undesirable, and so the new software allows this feature to be optionally omitted.

Parameters

Two parameters are involved with the new features, and these are numbers 27 and 30.

Parameter 27 (Motorised vane fitted) now has three possible values: 0 = Vane fitted, and cycles at power up 1 = Vane not fitted 2 = Vane fitted but does not cycle at power up.

For compatibility, the previous two possible values of parameter 27 have the same meaning: i.e. 0 = Vane fitted, 1 = Vane not fitted

Parameter 30 (previously unused) can now have values between 0 and 20 0 = No torque applied at end of opening cycle 1 to 20 = value of opening torque to be applied

If door open holding torque is required, the value of parameter 30 should be set to the minimum required to keep the doors open, in order to prevent overheating of the door motor if an operational mode such as car preference, or a fault, keeps the door open for a long time.

More Information
Part No. PDECA205
Weight 1.0000
Write Your Own Review
You're reviewing:E OPERATOR SOFTWARE